Disable Wi-Fi - Spectrum (Time Warner)

Spectrum Wave 2 - RAC2V1S Sagemcom

1. Log into the router admin GUI on Web by entering 192.168.1.1 in the browser address bar
2. Enter the router login username and password found on the back of you router
3. Under Connectivity, click on the gear icon on the top-right of the Wi-Fi 2.4GHz tile
4. While in the Basic tab, toggle the Enable 2.4GHz Wireless to OFF
5. Click on Apply
6. Repeat the previous three steps for the 5GHz.  

Spectrum Wave 2 - RAC2V1K Askey

1. Log into the router admin GUI on Web by entering 192.168.1.1 in the browser address bar
2. Enter the router login username and password found on the back of your router.  The default for both is: admin
3. Click on the Advanced tab
4. Under Connectivity, click on the gear icon on the top-right of the Wi-Fi 2.4GHz tile
5. While in the Basic tab, toggle the Enable 2.4GHz Wireless to OFF
6. Click on Apply
7. Repeat the previous three steps for the 5GHz.  

Spectrum Wave 2- RAC2V1A Arris

1. Log into the router admin GUI on Web by entering 192.168.1.1 in the browser address bar
2. Enter the router login username and password found on the back of your router.  The default for both is: admin
3. In the Basic Setup Page, click on Basic Wireless Settings
4. Uncheck Enable SSID for both 2.4GHz and 5 GHz
5. Click on Apply

Neatgear WND 3800/4300, Netgear 6300

1. Log into the admin GUI on Web by entering http://www.routerlogin.net. in the browser address bar
2. Enter the your admin username and password. The default user name and password are admin and password, respectively. 
3. Click on the Advanced tab 
4. Click on the Advanced Setup menu and then Wireless Settings
5. Uncheck the Enable Wireless Router Radio for both the 2.4GHZ and 5GHZ networks 
6. Click on Apply

Neatgear CG814WG

1. Log into the admin GUI on Web by entering 192.168.0.1 in the browser address bar
2. Enter the your admin username and password. The default user name and password are admin and password, respectively
3. Uncheck Enable Wireless Access Point 
4. Click on Apply

Sagemcom F@st 5620

1. Log into the router admin GUI on Web by entering 192.168.1.1 in the browser address bar
2. Enter the router login username and password found on the back of you router. 
3. Under Connectivity, click on the gear icon on the top-right of the Wi-Fi 2.4GHz tile
4. While in the Basic tab, toggle the Enable 2.4GHz Wireless to OFF
5. Click on Apply
6. Repeat the previous three steps for the 5GHz  

SMC 8014W-G

1. Log into the router admin GUI on Web by entering 192.168.0.1 in the browser address bar
2. Enter the your admin username and password. The default user name and password are cusadmin and password, respectively
3. Click on Wireless
4. Under Wireless settings, check Disable Wireless Module
5. Click on Apply