Tech Specs & Capabilities

  • SuperPod Wi-Fi Interfaces Triple band, simultaneously operating 2.4GHz and 5GHz 2x2 MIMO and 5GHz 4x4 MU-MIMO 802.11b/g/n/ac radios Operating bandwidths of 20/40MHz for 2.4GHz radio and 20/40/80MHz for 5GHz radios AC3000 Gigabit Wi-Fi (400 + 867 + 1734 Mbps) Wireless On-boarding Interface ...

  • Both Superpods with WiFi 6 (SuperPods AX) and original SuperPods work seamlessly together to extend Wi-Fi coverage throughout your business. Having multiple SuperPods is ideal for businesses larger than 1000 square feet. Wi-Fi capabilitiesThe original SuperPod features tri-band 802.11ac Wi-Fi con...

  • It's difficult to provide exact numbers because of all the variables such as layout, construction material, furniture, and equipment found in a workplace. We recommend starting with at least one SuperPod for small businesses of 1000 square feet or less, with an additional SuperPod for every addit...

  • No. Currently, SuperPods, PowerPods, and the original Pods from HomePass networks cannot be used in WorkPass networks, although WorkPass SuperPods and SuperPods AX can be mixed.

  • WPS was a common method of adding a device with a limited user interface (printers, IoT devices) to a wireless network.Plume does not currently support enabling WPS in the app, as it was discovered to be a less secure connection method for Wi-Fi networks. Check with your device manufacturer, as m...

  • No LED When initially plugging in any pod into an outlet, the light should always turn solid for a moment, and then the LED will slowly pulse while it is trying to connect to the cloud. Once connected to our cloud, the LED will then turn off. If there is no light at all when first plugging in the...

  • The SuperPod AC is Tri-band, adding an additional 5GHz 4x4 MIMO Wi-Fi radio to increase speeds and coverage throughout the business. For real-world single device maximum speeds on a SuperPod one hop away from the gateway pod, you can expect up to 400-450 Mbps.  We have seen raw single device Wi-F...

  • If you use a VPN for work, Plume has VPN passthrough support, allowing any client devices on your WorkPass network to run a VPN client to connect through a VPN service.  If you want all of your network devices to go through a VPN service, you can connect your Plume pods in bridge mode to a separa...

  • Plume does not support Power over Ethernet (PoE). You will not be able to run PoE devices wired to Plume, they will require a separate power supply. We have designed our pods with this in mind in order to maintain their compact design, after all, we like to be stylish.All Plume pods must be plugg...

  • Yes. Plume supports IPv6, although the implementation depends on the current Networking Mode of your Plume network.Bridge mode - Plume passes through all IPv6 traffic and configuration between your Wi-Fi devices and your router.Router mode - If your ISP provides your Plume network with IPv6 addre...