SuperPod Technical Specifications

SuperPod

• Wi-Fi Interfaces
  • Triple band, simultaneously operating 2.4GHz and 5GHz 2x2 MIMO and 5GHz 4x4 MU-MIMO 802.11b/g/n/ac radios
  • Operating bandwidths of 20/40MHz for 2.4GHz radio and 20/40/80MHz for 5GHz radios
  • AC3000 Gigabit Wi-Fi (400 + 867 + 1734 Mbps)
• Wireless On-boarding Interface
  • Bluetooth® Smart Ready
• Wi-Fi Channels
  • 1 to 11 for US and Canada
  • 1 to 13 Rest of world
  • 36 to 48 and 149 to 161 for US and Canada
  • 36 to 48 Rest of world
  • DFS channels
    • 52-64, 100-144 in the US
    • 52-64, 100-116, 132-144 in Canada
    • 52 to 64, 100 to 112 and 132 to 140 Rest of world
• Security
  • WPA2-PSK (AES)
  • SPI Firewall,
  • VPN passthrough
• Prioritization
  • WMM, DSCP and 802.1p
• Wireless Networks
  • Secure, Employee and Guest SSIDs
  • Each SSID covers both 2.4GHz and 5GHz bands

• Modes of Operation
  • Router mode with NAT, IPv4 DHCP server, and firewall or Bridge operation
  • IPv6 propagation when operating in Bridge mode
• Operating Requirements
  • Temperature: 32 - 104 F (0 - 40C)
  • Humidity: 10% - 90% relative
  • Power: 110 - 240VAC 50/60Hz
• Power Consumption is based on operating use
  • 4.5W Standby
  • 10W Average
  • 15W Maximum
• Plug Types
  • US
  • Plugs directly into the wall
• Ethernet Ports
  • Two 100Mb/1Gb Ethernet ports operating as WAN or LAN
  • Auto-detection of WAN or LAN functionality
• Processor: ARM a7 quad-core, 717 MHz 
• RAM Memory: 512 MB
• Physical Specifications
  • Dimensions: 3.8" x 3.4" x 1.5" (95.5 mm x 86.7 mm x 39 mm), not including plug
  • Weight: 7.65 ounces (217g)
• 1 year limited warranty

SuperPod with WiFi 6 (SuperPod AX)

• Wi-Fi Interfaces
  • Triple band, simultaneously operating
  • 4x4 802.11ax 5GHz Channel width: 20/40/80/160MHz
  • 2x2 802.11ax 5GHz Channel width: 20/40/80MHz
  • 2x2 802.11ax 2.4GHz Channel width: 20/40MHz
  • Each radio is backward compatible with applicable previous
  • standards 802.11b/g/a/n/ac/ax.
• Wireless Onboarding Interface
  • Bluetooth® 5.0
• Wi-Fi Channels
  • 1-6-11 on the 2.4GHz
  • 36-48, 52-64, 100-112, 116-128, 132-144 and 149-161 on the 5.0GHz
  • Any channel within this range shall be selectable as the primary channel.
• Security
  • Open, WEP, WPA, WPA/WAP2, WPA2, WPA2 Enterprise
  • WPA3 (Not supported yet, will be available in future firmware updates)
  • SPI Firewall,
  • VPN passthrough
• Prioritization
  • WMM, DSCP, and 802.1p
  • Support VLAN tagging, stripping, and QoS marking for any packet from any interface.
• Wireless Networks
  • Secure, Employee and Guest SSIDs
  • Each SSID covers both 2.4GHz and 5GHz bands
• Modes of Operation
  • LAN + WAN IPv6 as well as IPv4 addressing.
  • WAN side configurations of DHCP, fixed IP, VLAN tagged, PPPoE, and RIPv2. (Features to be available in a future firmware release)
  • Router mode with NAT, IPv4 DHCP server, and firewall or Bridge operation
  • IPv6 propagation when operating in Bridge mode
• Operating Requirements
  • Temperature: 32 - 104 F (0 - 40C)
  • Humidity: 5% - 95% non-condensing relative humidity
• Plug Types
  • US (Type A)
  • Plugs directly into the wall
• Ethernet Ports
  • LAN: Single 100/1000M Ethernet
  • WAN: Single 100/1000M - 2500 Ethernet
  • Auto-detection of WAN or LAN functionality
• Processor: Quad-core 1.5 GHz ARM Cortex
• RAM Memory: 512 MB
• Storage: 256 MB NAND + 4 MB NOR
• Physical Specifications
  • Dimensions: 95 x 86 x 36mm (not including plug)
  • Weight: 217 g 
• 1-year limited warranty